Polk Audio High Performance In-Wall Center Channel Speaker System User Manual


  Open as PDF
of 2
 
2 Polk Audio Custom
Install Pr
oduct: Model Number
WIRE RECOMMENDATIONS
Runs Gauge
Lengths up to 25' 18 or 16
Lengths greater than 25' 16 or 14
but less than 50'
Lengths greater than 50' 14 or 12
but less than 75'
Lengths greater than 75' 12
Important Note: LCi-Series In-wall Loudspeakers are not mag-
netically shielded and should not be placed closer than 1' (30cm)
from a CRT (picture tube) television or video monitor.
PLACEMENT
Install the LCic as close as possible to ear level.
If the speaker needs to be installed higher
, aim
the tweeter up or down as required.
ROOM ENVIRONMENT CONTROL
Tweeter Switch
If your listening r
oom is very reflective, with smooth sheetr
ock
walls, hardwood floors, and non-cushioned furniture, the sound
will be overly “bright” and unnatural. Selecting the “cut” setting
compensates for the effect of reflectivity in a hard room.
Tweeter attenuation flattens room response, without hindering
higher frequency response, for warmer, more realistic sound and
mor
e accurate imaging.
If you have questions, please contact your Authorized
Polk Audio Dealer or Customer Service at 1-800-377-7655
Monday through Friday 9am-6pm EST.
SPECIFICATIONS
LCiC
Product Weight: 8.5 lbs. (3.86kg)
PERFORMANCE
P
OWER HANDLING (WATTS/CHANNEL) 10-150W CONTINUOUS
IMPEDANCE (NOMINAL) 4 OHMS
F
REQUENCY RESPONSE (OVERALL) 30HZ–27KHZ
E
FFICIENCY (2.83V@1M) 91dB
SPEAKER WEIGHT 8.5 LBS (3.86KG)
DRIVER COMPLEMENT
MIDBASS 2-5 1/4" (13.34CM)
AERATED POLYPROPYLENE
DYNAMIC BALANCE
™
DRIVERS
TWEETER 1-1" (2.54CM)
A
IMABLE RING RADIATOR TWEETER
CONNECTIONS
SPEAKER WIRE
MAXIMUM WIRE SIZE ACCOMMODATED 12 AWG
MINIMUM RECOMMENDED 18 AWG
INPUT CONNECTORS HEAVY-DUTY SPRING LOADED
PUSH TERMINALS
Web Address:
For more information on the LCiC, log onto
www.polkaudio.com/downloads/manuals/
home/LCic_manual.pdf
 previous