Polk Audio 330T Speaker User Manual


 
4 Polk Customer Service 1-800-377-7655 (Outside US: 410-358-3600 Monday-Friday, 9:00 AM-5:30 PM Eastern Time polkcs@polkaudio.com
Take Inventory
Inside each speaker container, you should find the following:
1. One TSx floorstanding speaker, two bookshelf speakers
or one center channel speaker
2. TSx manual
3. Registration card
4. Adhesive-backed rubber pads—(8 for bookshelf
speakers or 4 center channel speaker)
5. Wall mount template (for TSx110b bookshelf speakers only)
Important Note: If anything is missing or damaged, or if your
speaker fails to operate, notify Polk Customer Support
Services immediately at 800-377-7655.
Speaker Location
(550t, 440t, 330t, 220b & 110b)
Create an equilateral triangle between the speakers and the listening
position. Toe-in to your listening preference. If you notice video distortion
or discoloration, immediately move the speakers away from the video
source and call Polk Customer Service 800-377-7655 (US and Canada)
or polkcs@polkaudio.com.
Using Binding Post Connections
1. Loosen hex nut.
2. Insert speaker wire through hole.
3. Tighten hex nut.
4. Do not insert insulated section
of speaker wire.
Please observe the proper polarity
One of the terminals on the rear of the speaker is marked red (+) and
the other black (–). Make certain that you connect the wire from the
red (+) terminal of your receiver or amplifier to the red (+) terminal on
your speaker, and the wire from the black (–) terminal of your receiver
or amplifier to the black (–) terminal on your speaker. Most wire has
some indication (such as color code, ribbing, or writing) on one
of the two conductors to help maintain consistency.
Bi-Wiring
(550t, 440t & 330t)
Bi-wiring, or using separate speaker wire connections for
high and low frequency sections. Remove flat metal jumpers.
Bi-Amping
(550t, 440t & 330t)
Bi-amping, or using separate amplifiers for the low and high
frequency sections of your speakers. Remove flat metal jumpers.
Basic Bookshelf and Center Speaker Hookup
(220b, 110b, 250c & 150c)
Set Bookshelf and Center Speakers to “small”
in your receiver’s Bass Management settings.
Power Amplifier
Front
RL
1
3
2
4
To use Banana Plugs (US only):
Carefully pry out the binding post
plugs to expose banana plug holes.
(This is for US owners only.)
Left Right
Low Frequency
Amplifier
RL RL
High Frequency
Amplifier
Power Amplifier