Filter
Top Products
12
RIGHT OUTPUTS
+
+
LEFT OUTPUTS
+
+
AM PLIFIER CONFIGURATION SELECTOR
REFER TO OW NERS MANUAL FOR USAGE INSTRUCTIONS
RCA STEREO XLR STEREO
RIGHT INPUTS
LEFT INPUTS
INPUT/OUTPUT CONNECTION
R
EAR
P
ANEL
S
HOWING
L
OCATION
O
F
I
NPUT
/O
UTPUT
T
ERMINALS
It is important that you connect your loudspeakers (outputs) and preamplifier or processor (inputs) to the
Plinius SB-301 Power Amplifier correctly to ensure the amplifier is not damaged, and sounds it’s best
with your system. Now that you have read and familiarised yourself with the connections on the back of
the amplifier as covered in the previous section, we will describe in detail the different ways in which you
can connect the amplifier to your system.
There are essentially two different ways that you can connect your system components to the Plinius SB-
301 Power Amplifier:
1. RCA STEREO
2. XLR STEREO
RCA STEREO
Connect your processor or input signal to the two RCA inputs at the top of the amplifier back panel. Make
sure you connect the red coded cable to the red RIGHT RCA input and the black (or white) cable to the
black LEFT RCA input. Also make sure the RCA connectors are a snug fit and are inserted all the way in.
Next connect your loudspeaker wires to the output posts on either side of the rear panel. Connect your
right loudspeaker (ie the one on the right of you when seated in your normal listening position) to the right
output terminals, ensuring that the red positive (+) terminal is connected to the red terminal on your
loudspeaker. Do the same with the black or negative (-) terminals.
Now turn the ACS switch clockwise so that it is in the RCA Stereo position. It is now safe to switch on
your amplifier.