Filter
Top Products
13
MAINS/LINE FUSE
MAINS/LINE FUSEMAINS/LINE FUSE
MAINS/LINE FUSE
A Mains/Line fuse is fitted within the IEC socket on the rear of the amplifier. A small drawer at the bottom
of this socket may be removed (after the IEC plug is removed) by levering it out with a flat blade
screwdriver. The fuse fitted should be rated at no greater than 5 amps slow blow.
IMPORTANT
IMPORTANTIMPORTANT
IMPORTANT:
: :
: DO NOT FIT A FUSE WITH A HIGHER RATING.
DO NOT FIT A FUSE WITH A HIGHER RATING.DO NOT FIT A FUSE WITH A HIGHER RATING.
DO NOT FIT A FUSE WITH A HIGHER RATING.
In the unusual event that this fuse should blow, you must first establish the cause of this failure (such as
power surges, damaged mains cable, etc.) before replacing the fuse with one of the same rating and type.
Should the amplifier continue to suffer mains fuse failure, contact your PLINIUS
PLINIUSPLINIUS
PLINIUS dealer.