Filter
Top Products
8
This panel incorporates all the terminals for connecting the input signals from your CD player, tuner, etc,
and the outputs to the loudspeakers and mains supply.
Please remember that your Plinius 8200 Integrated Amplifier is a high quality electronic instrument
capable of an exceptional level of performance. Be sure that you understand your system’s requirements
fully before you make any connection to this amplifier.
DESIGNED AND MANUFACTURED IN
NEW ZEALAND BY
AUDIBLE TECHNOLOGIES LTD
P.O. BOX 1836
PALMERSTON NORTH
CAUTION
RISK OF ELEC TRICAL SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE RISK OF
ELECT RICAL SHOCK DO NOT REMOVE
COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIE D SERVICING PERSONNEL.
SERIAL No.
POWER
CONSUMPTION
50/
60
400V/A
V
OLTAGE Hz
PLINIUS 8200 MkII
INTEGRATED AMPLIFIER
IN OUT IN OUT
PHONO CD TUNER TAPE 1 PRE OUTPROCESSOR
TAPE 2
MUTE
RIGHT CHANNEL LEFT CHANNEL
PROCESSOR
BYPASS ONLY
IN
RIGHT CHANNEL FUSES LEFT CHANNEL FUSES
REAR PANEL SHOWING INPUT AND OUTPUT TERMINALS, MUTE AND
PROCESSOR BYPASS SWITCHES, AND MAINS SOCKET.
INPUT TERMINALS
The input terminals for your Plinius 8200 Integrated Amplifier are easily accessible along the top of the
rear panel. These standard RCA terminals are for use with unbalanced signals from phono, CD, tuner, and
two tape decks. The phono inputs are suitable only for low level input phono turntables, while the rest are
all ‘line level’ inputs, suitable for audio equipment from most manufacturers. Consult your PLINIUS
PLINIUSPLINIUS
PLINIUS dealer
for further advice if required.
OUTPUT TERMINALS
Connections for the loudspeakers are provided on the right hand side of the rear panel. Two parallel pairs
of five way binding posts for each channel are fitted – these provide ease of use with bi-wiring and
multiple cables requiring a large contact area.