Filter
Top Products
Customize the headset by changing the eartip, wearing it on the right or
left and optimizing the position of the microphone.
The headset comes with a pre-installed eartip. To install a different eartip see the following:
1
Remove the pre-installed eartip by pushing in and turning the eartip CLOCKwise, then pull
firmly.
2
Choose the size and style of eartip that fits most comfortably. Align eartip tabs with notches in
headset. Push in firmly and twist COUNTER clockwise.
NOTE When installing a gel tip ensure the raised part of the eartip is pointed toward the curved
section of the headset as shown.
When you wear the headset, the microphone should rest as close to your cheek as possible
without touching. The microphone can be adjusted inward by the pivoting earpiece to optimize
the position of the headset.
1
Slide the headset over and behind your ear, then press gently toward your ear.
2
Rotate the microphone boom until it is pointed toward your mouth.
Customize Your Headset
Change the Eartip
Position Your Headset
8