Filter
Top Products
NOTE If you don't have remote call control through a lifter (HL10) or cable (EHS), manually remove
desk phone handset before each call.
2
Dial a call using your desk phone.
3
To end the call, press the headset call button and hang up the handset.
Alternatively, you can place an outgoing call by pressing your headset call control button, then
d
i
aling from your desk phone if the deskphone is the default line.
Place a mobile phone call
1
While wearing your headset, short press the base mobile button.
NOTE I
f you place the mobile phone call without pressing the base mobile button first, the audio will
s
tay on the mobile phone. If you would like to transfer the audio to your headset, short press the
mobile base button.
2
Dial a call from your mobile phone.
3
End the call by pressing the headset call control button.
Hands-free dialing
To
enable hands-free dialing, install the Plantronics software. Once installed, go to Start >
Programs > Plantronics > Plantronics Control Panel > Device Settings > Base and activate Initiate
Mobile voice commands. For hands-free dialing, initiate the mobile call from the base by
pressing the base mobile button. Your mobile phone will prompt you for voice commands.
Alternatively, you can dial a number from your mobile phone and then press the base mobile
button to move the audio to the headset.
Place a Softphone Call
1
While wearing your headset, short press the base computer button.
2
Di
al a call from your computer softphone.
3
End the call by pressing the headset call control button.
22