Plantronics S11 Headphones User Manual


 
TELEPHONE
HEADSET SYSTEM
S11
LIMITED WARRANTY
for Plantronics Commercial Products
Purchased in the US and Canada
• This warranty covers defects in materials and workmanship of Commercial
Products manufactured, sold or certified by Plantronics which were purchased
and used in the United States and Canada.
• This warranty lasts for one year from the date of purchase of the Products.
• This warranty extends to you only if you are the end user with the original
purchase receipt.
• We will, at our option, repair or replace the Products that do not conform to
the warranty. We may use functionally equivalent
reconditioned/refurbished/remanufactured/pre-owned or new Products or
parts.
• To obtain service in the U.S. contact Plantronics at (800) 544-4660 and in
Canada call (800) 540-8363. If you need additional information, please
contact our service centers at the numbers provided.
• THIS IS PLANTRONICS’ COMPLETE WARRANTY FOR THE PRODUCTS.
• This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state or province to province. Please contact
your dealer or our service center for the full details of our limited warranty,
including items not covered by this limited warranty.
FCC REGISTRATION INFORMATION
This equipment complies with Part 68 of the FCC rules and the requirements adopted by ACTA. On the exterior
of this equipment is a label that contains a product identifier in the format US:AAAEQ##TXXXX. If
requested, this information must be provided to your telephone company.
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply
with the applicable FCC Part 68 rules and requirements adopted by ACTA. A compliant telephone cord and
modular plug is provided with this product. It is designed to be connected to a compatible jack that is also
compliant. See installation instructions for details.
The REN is useful to determine the quantity of devices you may connect to your telephone line. Excessive RENs
on a telephone line may result in the devices not ringing in response to an incoming call. In most, but not all
areas, the sum of the RENs should not exceed five (5.0). To be certain of the number of devices you may
connect to your line, as determined by the REN, contact your local telephone company. For product approved
after July 23, 2001, the REN for this product is part of the product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by ### are the REN without the decimal point. (For example,
03 represents a REN of 0.3.) For earlier producers, the REN is separately shown on the label.
If this telephone equipment causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the
telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file
a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations, or procedures that could
affect the proper functioning of your equipment. If they do, you will be notified in advance in order for you to
make necessary modifications to maintain uninterrupted service.
If trouble is experienced with this unit, for repair or warranty information, please contact customer service at
(800) 544-4660. If the equipment is causing harm to the network, the telephone company may request that
you disconnect the equipment until the problem is resolved.
DO NOT DISASSEMLE THIS EQUIPMENT: it does not contain any user serviceable components.
We recommend the installation of an AC surge arrester in the AC outlet to which this equipment is connected.
Telephone companies report that electrical surges, typically lighting transients, are very destructive to customer
terminal equipment connected to AC power sources.
INDUSTRY CANADA NOTICE
Terminal Equipment
Notice: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications.
This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that
registration was performed based on a Declaration of Conformity indicating that Industry Canada technical
specifications were met. It does not imply that Industry Canada approved the equipment.
Notice: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment itself.
The REN assigned to each terminal equipment provides an indication of the maximum number of terminals
allowed to be connected to a telephone interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all
the devices does not exceed five.
Radio Equipment
The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications
were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the
device. “Privacy of communications may not be ensured when using this telephone”.
WELCOME
IMPORTANT SAFETY INSTRUCTIONS
1. Read and understand all instructions.
2. Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
3. Do not locate this product near water, for example, near a bathtub or
sink, in a wet basement, or near a swimming pool.
4. This product should never be placed near or over a radiator or heat
register. It should not be placed in a built-in installation unless proper
ventilation is provided.
5. Do not locate this product in an area where the power cord is likely to
be damaged by foot traffic or furniture.
6. Do not overload outlets and extension cords as this can result in risk
of fire or electric shock.
7. Never disassemble or push objects of any kind into the product since
this may short out parts which could result in a fire or electric shock.
Never spill liquid of any kind on the product.
8. Use caution when installing or modifying telephone lines.
9. This product requires an approved power supply such as the one
supplied by a Listed Class 2 Direct Plug-In Power Unit rated 9VDC
350mA. Plantronics Part No. 45671-01, rated at an input voltage of
120 VAC, 60Hz and 6 W.
10. This product requires AC power in order to operate. During a power
outage, have another telephone available that is powered only by the
telephone line.
11. Keep all product cords and cables away from operating machinery.
12. Avoid using a telephone (other than a cordless type) during an
electrical storm to avoid the risk of electric shock from lightning.
13. Do not use the telephone to report a gas leak while you are in the
vicinity of the leak.
SAVE THESE INSTRUCTIONS
© 2003–2005 Plantronics, Inc. All rights reserved. Plantronics, the logo
design, and Plantronics and the logo design combined are trademarks or
registered trademarks of Plantronics, Inc.
Printed in USA. 65806-01 (2•05)
INFORMATION ON SUPPLIES AND ACCESSORIES
For information on
supplies and accessories call Plantronics
at 1-800-544-4660 or visit our web site at
www.plantronics.com
.
See also Diagram Key for additional part numbers.
Thank you for selecting the S11 Telephone Headset System from
Plantronics. This User Guide will help you install your S11 Telephone
Headset System and learn its basic operation.
The S11 Telephone Headset System is designed to add a headset to an
existing telephone.
The S11 System provides precise levels of listening and talking comfort
and crystal clear voice quality.
The S11 System is not designed to work on telephones that have the
dial pad in the handset or on cordless telephones.
This user guide provides the following steps to quickly set up and use
your headset system.
This side has:
Important Safety Instructions
FCC Registration
Limited Warranty
The other side has the Quick Start Guide:
Identify Components
Setup
Using the Headset
Placing a Call
Receiving a Call
Troubleshooting
Plantronics Help Desk
QUICK START USER GUIDE