Filter
Top Products
Connect to network 04
27
En
Initial menu (System Information)
When Web Control is accessed, the following menu will
appear. This menu can be used to confirm detailed
information about the unit.
1 Network Configuration
Select this when using methods C or D in Network setting on
page 18 to make initial connection settings.
2 Friendly Name
Select this to change the “Friendly Name.”
Network Configuration
When using procedure C in Network setting on page18,
select AUTO or MANUAL before using this menu.
AUTO
SSID will be searched automatically, and can be selected
from the next pull-down menu. This is the normal method to
be used.
MANUAL
SSID and Security items must be input manually. Use this
method if the SSID is not displayed when using AUTO.
1 SSID
Using AUTO
Displays the recognized wireless access point. Select the
access point you wish to connect to.
Using MANUAL
The input must be no longer than 32 characters.
2Security
When using AUTO, this will be set automatically when
selecting SSID.
Select the encryption method depending on SSID.
3 WEP Key/
WPA Passphrase
If WEP is selected in step 2 Security, the WEP Key will be
displayed.
Alternately, if WPA-PSK(TKIP), WPA-PSK(AES), WPA2-
PSK(TKIP), or WPA2-PSK(AES) is selected in Security, “WPA
Passphrase” will be displayed.
If you select None in the Security menu, no character string
will be displayed.
WEP Key
Displays the WEP key in the blank typ e.
WPA Passphrase
Displays the WPA Passphrase in the blank type. The WPA
Passphrase can be changed between 6 and 63 characters.
4 DHCP
Switches the DHCP setting between ON and OFF.
Under normal conditions, leave ON. If you wish to input a
fixed IP, set this to OFF and the following input item will be
requested.
5Apply
Press once settings have been completed. The unit will
automatically power down.
To use a wired connection thereafter, connect a LAN cable to
the router.
When using wireless connections, confirm that the LAN
cable is disconnected.
1
2
s1000.1000.0
XW-SMA1
5
2
1
4
3
Item Operation
IP address Set the IP address.
Subnet Mask Set the Subnet Mask.
Default Gateway Set the Default Gateway.
Primary DNS Server Set the Primary DNS Server.
Secondary DNS
Server
Set the Secondary DNS Server.