Filter
Top Products
Part names and functions 03
15
En
Front panel
1 on (power on) indicator
When the power is on, this indicator lights.
2
input
indicator
When the input source changes, this indicator lights. The
indicator’s color changes as noted below.
Light OFF - AUX IN
Lights blue - AirPlay
Lights red - iPod
Lights green - DLNA (DMR) Digital Media Renderer
3
network
indicator
When the network status changes, this indicator lights. The
indicator’s color changes as noted below.
Lights blue - good connection
Flashes blue - weak signal
Flashes red - connection failure
*In the event that other colors appear, see Network
setting on page 18.
4 Battery indicator (XW-SMA3 only)
Displays the built-in battery charge status, or lights when the
built-in battery is being charged. The indicator changes as
noted below.
• When the unit is connected to AC adapter
Lights blue - Battery charging is completed.
*When battery charging is completed on the standby
mode, the indicator lights off.
Lights purple - Battery is being charged.
*If the battery indicator intermittently lights purple, see
Additional information on page 37.
• When this unit is not connected to AC adapter
Lights blue - Battery charge is usable.
Lights red - Battery has less than one-half charge.
Flashes red - Battery charge is low.
*A fully charged battery provides approximately 4 hours
of use at maximum volume and approximately 6 hours
at 50 % volume.
*The battery indicator is not designed to function as an
accurate measure of remaining battery charging.
*If the battery indicator intermittently lights purple, see
Additional information on page 37.
5
standby/on
button
Switches the unit between Standby and On.
on
input
network
input
volume
standby/on
1
2 3
4 5 6 7