Filter
Top Products
Surround sound and other settings
05
23
En
English
Français
Deutsch
Nederlands
Italiano
Español
SR+ Setup for Pioneer plasma
displays
Make the following settings if you have
connected a Pioneer plasma display to this
unit using an SR+ cable. Note that the number
of function settings available will depend on
the plasma display you’ve connected.
See also
Using this unit with a Pioneer plasma
display
on page 32.
1 Press SR+ on the remote.
2 When you see ‘Setup?’ appear in the
display, press
ENTER
.
3 Use
/
to select the setting you want.
•
Vol COff
– This unit does not control the
volume of the plasma display
•
VOL C ON
– When this unit is switched to
one of the inputs that use the plasma
display (
DVD
, or another one of functions
below), the volume on the plasma display is
muted so only sound from this system is
heard.
4 Assign any input source connected to the
plasma display to the corresponding input
number.
Use
/
to select the source (
DVD
,
TV
,
L.1
or
L.2
), then
/
to select the input number.
This matches this unit’s input source with a
numbered video input on the plasma display.
For example, assign
DVD:3
if you have
connected the your DVD video output to video
input 3 on the plasma display.
5 When you're finished, press
ENTER
.
XV-DV333-434.book 23 ページ ２００５年２月２３日 水曜日 午後１時５２分