Filter
Top Products
Controls and displays
04
23
En
10 Tuner controls
The TUNING +/– buttons can be used to find
radio frequencies. The STATION +/– buttons
can be used to select preset radio stations
(pages 35–36).
BAND (page 34)
Use to switch between the AM and FM
bands when the tuner is selected.
CLASS (pages 35–36)
Use to switch between the three banks
(classes) of station presets.
MPX (page 34)
Use to switch between auto stereo and
mono reception of FM broadcasts. If the
signal is weak then switching to mono will
improve the sound quality.
DISPLAY (page 36)
Use to switch the display between the
station preset name and the frequency.
11 TOP MENU
Displays the disc ‘top’ menu of a DVD.
12 } ] ’ ‘ and ENTER/SETUP buttons
Use these arrow buttons when setting up your
surround sound system. These buttons are also
used to control DVD menus/options.
13 RECEIVER
Use to switch to the receiver controls on the
remote control. Also used when setting up the
surround sound for the receiver.
14 CHANNEL SELECT (page 33)
Use to select a channel when setting up the
surround sound of the receiver.
TEST TONE (page 33)
Use to sound the test tones when setting
up the surround sound of the receiver.
LEVEL +/– (page 33)
Use to set up the levels of the surround
sound of the receiver.
EFFECT +/– (page 26)
Use to add or subtract the amount of effect
in different sound modes or advanced
listening modes.
15 DVD CONTROL buttons
You can use these buttons to control a Pioneer
DVD player connected to your system.
Button What it does
DVD Turns DVD power on/off.
AUDIO Changes the audio language or
channel.
SUBTITLE Displays/changes the subtitles
included in multilingual DVD-
Video discs.
1 Press to start fast reverse
scanning.
3 Starts playback.
¡ Press to start fast forward
scanning.
7 Stops playback.
8 Pauses a disc that’s playing, or
restarts a paused disc.
4 Skips to the start of the current
track or chapter, then to
previous tracks/chapters.
¢ Skips to the next track or
chapter.