Filter
Top Products
Connecting up03
16
En
Windows Media
®
, and the Windows logo are trademarks,
or registered trademarks of Microsoft Corporation in the
United States and/or other countries.
Connecting other video
components
This receiver has audio/video inputs and
outputs suitable for connecting analog or
digital video recorders, including VCRs, DVD-
recorders and HDD recorders.
1 Connect a set of audio/video outputs on
the recorder to the DVR/VCR AUDIO and
VIDEO inputs on this receiver.
Use a stereo RCA phono cable for the audio
connection and a standard RCA video cable for
the video connection.
1
2 Connect a set of audio/video inputs on
the recorder to the DVR/VCR AUDIO and
VIDEO outputs on this receiver.
Use a stereo RCA phono cable for the audio
connection and a standard RCA video cable for
the video connection.
2
3 If your video component has a digital
audio output, connect it to a digital input on
this receiver.
The example shows a recorder connected to
the
DIGITAL COAX 2 (DVR/VCR)
input.
3
The illustration shows the VSX-817, but
connections for the VSX-517 are the same.
Using the component video jacks
Component video should deliver superior
picture quality when compared to composite
video. A further advantage (if your source and
TV are both compatible) is progressive-scan
video, which delivers a very stable, flicker-free
picture. See the manuals that came with your
TV and source component to check whether
they are progressive-scan video compatible.
Note
1•
VSX-817 model only –
For better quality, you can also connect with S-video using the
S-VIDEO
DVR/VCR IN
jack.
• If your video component also has a component video output, you can connect this too. See
Using the component video jacks
on page 16 for more on this.
2
VSX-817 model only –
For better quality, you can also connect with S-video using the
S-VIDEO
DVR/VCR OUT
jack.
3 If your video component doesn’t have a digital audio output, omit this step. If it only has an optical digital output, you can con-
nect it to the optical input on this receiver using an optical cable. When you set up the receiver you’ll need to tell the receiver
which input you connected the component to (see
The Input Assign menu
on page 45).
COAX
OPT
OPT
(
CD
)
ASSIGNABLE
DIGITAL IN
1
2
(
DVR/VCR
)
COAX
(
DVD/LD
)
1
2
(
TV/ SAT
)
AM
LOOP
FM UNBAL
75
Ω
IN
IN
IN
MONITOR
OUT
OUT
VIDEO
SUB
WOOFER
IN
IN
IN
IN
OUT
OUT
IN
CD
DVR /
VCR
TV /
SAT
DVD
/LD
PLAY
CD-R
/TAPE
/MD
FRONT
PREOUT
REC
ANTENNA
D V D
5.1CH
INPUT
AUDIO
R
L
IN
AUX
ASSIGNABLE
DIGITAL IN
OUT
DVR /
VCR
TV /
SAT
DVD
/LD
IN
IN
IN
MONITOR OUT
S-VIDEO
DVR, VCR, LD player, etc.
DIGITAL OUT
OPTICAL COAXIAL
R L
VIDEO IN
R L
AUDIO IN
IN
REC
AUDIO OUT
PLAY
OUT
VIDEO OUT
3
2 1
VSX-817
VSX517_817.fm 16 ページ ２００７年２月２２日 木曜日 午後８時１１分