Filter
Top Products
Other connections
10
59
En
2 Press (SHIFT+) INPUT SELECT to select the input
source you want to listen to in the sub room.
3 Use (SHIFT+) VOLUME +/– to adjust the volume.
You won’t be able to adjust the volume if it is set to
FIXED
in the
Multi Room Setup
on page 67.
• You can only increase the volume to
0dB
.
• In addition to the controls above, you can also use the
CLASS
,
STATION +/–
and number buttons when
using the tuner.
Using the front panel multi-room controls
1 Press the MULTI ROOM ON/OFF button on the
front panel.
The
MULTI-ROOM
indicator lights in the front panel
display to indicate the multi-room control has been
switched on.
2 Press CONTROL.
Make sure that any operations for the sub room are done
while
MR:
(and the selected component) shows in the
display. If this is not showing, the front panel controls
affect the main room only.
3 Use the MULTI JOG dial to select the source.
Select between
DVD/LD
,
TV/SAT
,
DVR/VCR
,
TUNER
,
CD-R/TAPE/MD
or
CD
(in that order).
• If you select
TUNER
, you can use the remote control
to select a preset station (see
Listening to station
presets
on page 48 if you’re unsure how to do this).
4 Use the MASTER VOLUME dial to adjust the
volume.
This is only possible if you selected the
VARIABLE
volume control in
Multi Room Setup
on page 67.
• You can only increase the volume to
0dB
.
5 When you’re finished, press CONTROL again to
return to the main room controls.
You can also press the
MULTI ROOM ON/OFF
button on
the front panel to switch off all output to the sub room.
• Even if you don’t press
CONTROL
above, the system
automatically switches back to the main room
controls.
Note
• Multi-room can’t be used when you’re setting up the
system (from the on-screen
System Setup
menu).
• You won’t be able to switch the main room off
completely unless you’ve switched off the multi-room
control first.
• When the multi-room feature is switched on, you can
also change the sub room input source with the front
panel
MULTI JOG
dial, even when the main unit is in
standby.
• Remote operation may not be possible if direct light
from a strong fluorescent lamp is shining on the IR
receiver remote sensor window.
• The tuner cannot be tuned to more than one station
at a time. Therefore, changing the station in one
room also changes the station in the other room.
Please be careful not to change stations when
recording a radio broadcast.
• The volume levels of the main and sub rooms are
independent.
• When the
MULTI ROOM OUT
jacks are connected to
a sub room amplifier with a remote sensor and
Pioneer
CONTROL
terminals (page 22), both the IR
receiver and the amplifier may receive remote control
commands (making correct operation impossible)
during multi-room operation. In this case, place the
IR receiver and amplifier apart from each other, and
point the remote control directly at the IR receiver
during operation.
• If you don’t plan to use the multi-room feature for
awhile, turn off the power in both the sub and main
rooms. Make sure the
MULTI-ROOM
indicator goes
off.
• The sleep timer affects the sub room when the multi-
room feature is on.
MASTER VOLUME
DVD/LD TV/SAT DVR/VCR VIDEO1
CD
CD-R/
TAPE/MD
STANDBY/ON
MULTI JOG
TUNER VIDEO2
VSX
-
52TX
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
LISTENING MODE
SELECT
ENTER
PHONES
TUNER
CONTROL
TUNER
EDIT
SYSTEM
SETUP
RETURN CONTROL ON/OFF
MCACC
SETUP MIC
DIGITAL IN S
-
VIDEO VIDEO
VIDEO2 INPUT
AUDIOLR
MULTI ROOM
MULTI JOG MULTI JOG
TUNING/
STATION
BAND MPX TONE
ACOUSTIC
EQ
DIALOG
ENHANCEMENT
MULTI CH
IN
SIGNAL
SELECT
EXTENDED
MODE
SPEAKERS
MIDNIGHT/
LOUDNESS
MULTI
JOG
MULTI
JOG
VSX_52TX.book.fm 59 ページ ２００４年５月１４日 金曜日 午前９時２１分