Filter
Top Products
15
Set up Operation
Setting Up for Surround Sound
Setting up speaker levels for Dolby Pro Logic
In order to get the best surround sound you need to set up the relative speaker levels so that they all have the
same volume from your normal listening position. Follow the steps below using the TEST TONE to do this.
CLASS
MENU
MPX
SET UP
D. ACCESS
TOP MENU
SOURCE
SOURCE SELECT
DVD
TAPE
CD
TUNER
TV CONT.
CH.
SELECT
FUNCTION
FL
DIMMER
RECEIVER
MD
CD-R
*&#@
TV VOL.
EFFECT
TV FUNC.
TEST
TONE
MUTING
MASTER
VOLUME
DSP MODESORROUND
2
!
!
Î
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
LEVEL
CHANNEL
STATION
$
$
ENTER
RF ATT
DISP
FQ
FQ
1234
56
90
78
2
3, 5
4
1
Setting up speaker levels for DVD 5.1 CH
CLASS
MENU
MPX
SET UP
D. ACCESS
TOP MENU
SOURCE
SOURCE SELECT
DVD
TAPE
CD
TUNER
TV CONT.
CH.
SELECT
FUNCTION
FL
DIMMER
RECEIVER
MD
CD-R
*&#@
TV VOL.
EFFECT
TV FUNC.
TEST
TONE
MUTING
MASTER
VOLUME
DSP MODESORROUND
2
!
!
Î
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
LEVEL
CHANNEL
STATION
$
$
ENTER
RF ATT
DISP
FQ
FQ
1234
56
90
78
1
3, 5,
7
4, 6,
7
2
memo
1
Press the SURROUND button.
2
Press the 2 button.
3
Press the TEST TONE button.
A short test tone will be heard from each speaker in your set up in
turn. No test tone is heard from the sub woofer, however.
4
Adjust the respective speaker levels with the
LEVEL +/– buttons when the TEST TONE
sounds from that speaker.
Adjust the volumes of the speakers so that the volume of all
speakers appears equal from your normal listening position.
5
Press TEST TONE again.
When you are satisfied that the set up is complete, press the TEST
TONE button to return to normal operation.
• No TEST TONE sounds for the subwoofer
• These speaker level settings are applicable to PRO LOGIC,
PRO LOGIC THEATER 1 & PRO LOGIC THEATER 2 settings.
1
Use the FUNCTION button to select DVD 5.1
CH input mode.
2
Play a DVD 5.1 CH source and set volume.
3
Press the CH. SELECT button.
The first speaker, FL (front left), and its relative volume level
(+/–**dB) appears in the display.
4
Adjust the front left (FL) speaker level with
the LEVEL +/– buttons.
Adjust the volumes of the speakers to a standard level of your
choice when seated in your normal listening position.
5
Press CH. SELECT again to move to the next
speaker.
The second speaker CT (center) and it's relative volume level (+/–
**dB) appears in the display.
6
Adjust the center (CT) speaker level with the
LEVEL +/– buttons.
Adjust the speaker volume so it seems the same as the previous
speaker from your normal listening position.
7
Repeat steps 3 & 4 for all of your speakers.
Adjust the volumes of the all speakers so their volume seems the
same from your normal listening position.