Filter
Top Products
22
Front Panel
All the controls on the front panel are explained and/or referenced here. To open the front panel push
gently on the lower third of the panel.
1 STANDBY/ON button
Press to switch the receiver ON or into
STANDBY mode.
STANDBY indicator
Lights when the receiver is in STANDBY mode.
(Please note that this receiver consumes a
small amount of power [1.0 W] in the standby
mode.)
2 DSP MODE button (See p.43 & 44)
Press repeatedly to select a DSP sound mode.
(HALL 1, HALL 2, JAZZ, DANCE, THEATER 1,
or THEATER 2, 5/7 CH STEREO). Use these
modes to produce surround sound from
standard (two channel) stereo sources and
create different listening environments.
STEREO/DIRECT button (See p.43 & 52)
Switches the receiver into STEREO mode if it
was in a different sound mode (like ADVANCED
THEATER) or toggles between DIRECT and
STEREO mode. For more on STEREO mode
see p.52
DIRECT playback bypasses the tone controls,
DIGITAL NR, LOUDNESS, MIDNIGHT and
channel level for the most accurate reproduc-
tion of a program source.
STANDBY/ON
DSP
MODE
MULTI-ROOM
&SOURCE
INPUT
SELECTOR
MASTER
VOLUME
MIN MAX
THX CINEMA ADVANCED STANDARD
CONTROL
STANDBY
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
STEREO/
DIRECT
/DTS
N∫m¿≤≥ım
PHONES
S-VIDEO VIDEO
MULTI CH
INPUT
SIGNAL
SELECT
FL
DIMMER
TAPE 2
MONITOR
TONE
CHANNEL
SELECT
LOUDNESS
DIGITAL
NR
CLASS BAND
TUNER CONTROL
MEMORYMPX
VIDEO
SELECT
SPEAKERS
-
TUNING +
-
STATION +
-
TREBLE +
-
BASS +
L AUDIO R
VIDEO INPUT
VIDEO VCR 1/DVR VCR 2 DVD/LD TV/SAT
MD/TAPE1/
CD-R
TUNER
CD
PHONO
12 536789
10 11 12 13 14 15
17
16
4
/ DTS buttons (See p.41-45, 83, 84)
THX CINEMA – Cycles through the THX
CINEMA, THX SURROUND EX or THX AUTO
sound modes. Use when listening THX-
certified sources if you have THX-certified
speaker setup or want to re-create a THX-style
sound environment. It is also appropriate for
Dolby Digital, Dolby Pro Logic or DTS sources.
Those with surround back speakers can use all
three THX modes, those without can only use
the THX CINEMA mode.
ADVANCED – Use to select one of the four
Advanced Theater modes. Use to create certain
types of sound environments when listening to
Dolby Digital, Dolby Pro Logic or DTS sources.
STANDARD – Use for pure decoding of multi
channel sources, especially Dolby Digital, Dolby
Pro Logic or DTS sources. Each press toggles
between STANDARD and STANDARD 7.1
mode (for use with SURROUND BACK speak-
ers) and STANDARD auto (the receiver chooses
the appropriate STANDARD mode). Those with
surround back speakers can use all three
STANDARD modes, those without can only use
the STANDARD mode.
VSX-37TX
Displays & Controls