Filter
Top Products
<PRB1268>
En
12
MODE
3
DISC
SET
3
MODE
783
1¡4¢
RANDOM
DISC
SET
TRACK
SET
TIME
HI-LITE BEST
PREVIOUS
POWER
MODE CLEARPGMREPEAT
D
Î
FILE-TYPE CD PLAYER
REMOTE CONTROL UNIT
CU-P0090
78
9
45
6
12
3
DISC
–
+
0
VARIOUS OPERATIONS
This unit lets you program up to 100 of your favorite discs. For
example, you can store all the discs of your favorite artist, or some
other group of personal selections, and play only those discs.
You can even add other discs to the custom later on.
Operation example: Storing discs 3 and 12 in the CUSTOM II
file.
During stop mode, press
MODE so that the CUSTOM
II indicator lights.
DISC MIN SEC
CUSTOM
TRACK
II
÷ If you use DISC (–/+) to select a disc, it will be programmed
automatically after approximately 2 seconds.
To program and play only the discs
you want to hear (CUSTOM play)
÷ The parenthesis ( ) show operations for the main unit.
Use the digit buttons to
select disc.
DISC MIN SEC
CUSTOM
TRACK
II
( )
÷ If some disc number appears, press CLEAR.
DISC MIN SEC
CUSTOM
TRACK
II
Press DISC SET.
Repeat steps 2 and 3 to
store other discs.
DISC MIN SEC
CUSTOM
TRACK
II
(
)
Note!!
You cannot change the discs stored in the CUSTOM file. Likewise,
you cannot erase just one disc from the CUSTOM file.
÷ Pressing DISC (–/+) during CUSTOM playback lets you choose
among other discs stored in the CUSTOM file.
÷ If you use the digit buttons and DISC SET on the remote control
during CUSTOM playback to choose a disc not stored in the
CUSTOM file, “ no dISC” will be displayed for approximately
3 seconds.
÷ When a disc appointed to the CUSTOM file is not loaded in the
rack, “ no dISC” is displayed for approximately 3 seconds, the
disc is erased from memory, and CUSTOM searches for the next
disc.
÷ The discs stored in the CUSTOM file will not be erased when you
turn off the power.
÷ Items stored in memory are saved for approximately 2 days, even
if the power cord is unplugged. However, this period may be
shortened somewhat, depending on the amount of memory used.
(Memory Back-Up Function).
÷ While the hood is open, DISC (–/+) cannot be used for CUSTOM
file entry.
4
3
2
1
Erasing all the discs from the each CUSTOM
file.
Press MODE to choose CUSTOM, then press the CLEAR
button.
\
Checking the numbers of the stored discs.
Press TIME repeatedly (3 times) during stop mode so that
the display changes as shown below.
Press DISC(–/+). Each time you press DISC(–/+), a disc
number stored in the CUSTOM file is displayed. When all
the disc numbers have been displayed, the disc number
changes to a blank.
( = )
\
To start playback
Press MODE to select CUS-
TOM and press 3.
Playback starts from the lowest
disc No.
DISC MIN SEC
CUSTOM
TRACK
II
÷ The remote control is the most convenient way to perform these
operations.
DISC
6
MODE
6
DISC (–/+)
CLEARMODE
OPEN/
CLOSE
D
◊Û¿X/?≥
Î
'
FILE –TYME CD MECHANISM
7 41 ¡¢6
1-BIT DLC
DIRECT LINER CONVERSION
MODE
Digit buttons
DISC SET
CLEAR
DISC (–/+)
3
DISC
SET
1 2
DISC
)(
MODE