Filter
Top Products
6
Troubleshooting (Windows Vista)
When using Windows XP,
see page 4
; for Windows 7,
see page 10
; for Mac OS X,
see page 14
.
1. No sound
In the event the N-50’s power is set to Standby, or the source input is set to something other
than
Digital In USB
, do not start your computer’s media player software. Change the input to
Digital In USB
before starting your computer’s media player.
1 Click on [Start]
t
[Control Panel]
t
[System and Maintenance]
t
[System].
2 From the [Tasks] list, click on [Device Manager].
3 Click on [Sound, video and game controllers] and confirm that [Pioneer USB
Audio Device] is listed.
4 Click on [Universal Serial Bus controllers] and confirm that [USB Composite
Device] is listed.
If the above devices are not listed as described, confirm that the N-50’s input source is set
to
Digital In USB
, then either disconnect and reconnect the USB cable, or set the power to
Standby then turn it On again.
Procedure continues.
Procedure continues.