Filter
Top Products
05
Section
Cassette Player
En
19
English
Español
Deutsch
Français
Italiano
Nederlands
Introduction of advanced
cassette player operation
1 FUNCTION display
Shows the function status.
Press FUNCTION to display the function
names.
Press FUNCTION repeatedly to switch between
the following functions:
REPEAT (repeat play)—B-SKIP (blank skip)—RI
(radio intercept)
• To return to the playback display, press
BAND/ESC.
Note
• If you do not operate the function within about
30 seconds, the display is automatically
returned to the playback display.
Repeating play
Repeat play lets you hear the same track over
again.
1 Press FUNCTION to select REPEAT.
Press FUNCTION until REPEAT appears in the
display.
2 Press 5 to turn repeat play on.
REPEAT :ON appears in the display. The track
presently playing will play and then repeat.
3 Press ∞ to turn repeat play off.
REPEAT :OFF appears in the display. The track
presently playing will continue to play and then
play the next track.
Skipping blank tape sections
Blank skip automatically fast forwards to the
next song if there is a long period of silence (12
seconds or longer) between songs.
1 Press FUNCTION to select B-SKIP.
Press FUNCTION until B-SKIP appears in the
display.
2 Press 5 to turn blank skip on.
B-SKIP :ON appears in the display. Long peri-
ods of silence between songs will be skipped.
3 Press ∞ to turn blank skip off.
B-SKIP :OFF appears in the display. The com-
plete cassette tape will play.
Radio intercept
This function allows you to listen to the radio
during tape fast-forwarding/rewinding.
• The radio intercept function does not work
during a Music Search operation.
1 Press FUNCTION to select RI.
Press FUNCTION until RI appears in the display.
2 Press 5 to turn radio intercept on.
RI :ON appears in the display.
3 Press ∞ to turn radio intercept off.
RI :OFF appears in the display.
q