Pioneer KEH-P4950 Cassette Player User Manual


 
26
ENGLISH ESPAÑOL
PORTUGUÊS (B)
FRANÇAIS ITALIANO NEDERLANDS
Specifications
General
Power source .......... 14.4 V DC (10.8 – 15.1 V allowable)
Grounding system ........................................ Negative type
Max. current consumption ........................................ 8.5 A
Dimensions
(DIN) (chassis) ...... 178 (W) × 50 (H) × 155 (D) mm
(nose) ............ 188 (W) × 58 (H) × 20 (D) mm
(D) (chassis) ...... 178 (W) × 50 (H) × 160 (D) mm
(nose) ............ 170 (W) × 48 (H) × 15 (D) mm
Weight ...................................................................... 1.2 kg
Amplifier
Continuous power output is 17 W per channel min. into 4
ohms, both channels driven 50 to 15,000 Hz with no more
than 5% THD.
Maximum power output ...................................... 40 W × 4
Load impedance .......................... 4 (4 – 8 allowable)
Preout maximum output
level/output impedance .......................... 2.2 V /1 k
Equalizer (3 band equalizer)
(Low) .............................................................. ±12 dB
(Mid) .............................................................. ±12 dB
(High) ............................................................ ±12 dB
Loudness contour
(Low) .................. +3.5 dB (100 Hz), +3 dB (10 kHz)
(Mid).................. +10 dB (100 Hz), +6.5 dB (10 kHz)
(High).................. +11 dB (100 Hz), +11 dB (10 kHz)
(volume: –30 dB)
Cassette player
Tape ........................ Compact cassette tape (C-30 – C-90)
Tape speed ........................................................ 4.8 cm/sec.
Fast forward/rewinding time .... Approx. 100 sec. for C-60
Wow & flutter .......................................... 0.09% (WRMS)
Frequency response ...................... 30 – 16,000 Hz (±3 dB)
Stereo separation ...................................................... 45 dB
Signal-to-noise ratio .................... 61 dB (IEC-A network)
FM tuner
Frequency range ...................................... 87.5 – 108 MHz
Usable sensitivity .................................................... 11 dBf
(1.0 µV/75 , mono, S/N: 30 dB)
50 dB quieting sensitivity .... 16 dBf (1.7 µV/75 , mono)
Signal-to-noise ratio ...................... 70 dB (IEC-A network)
Distortion .......................... 0.3% (at 65 dBf, 1 kHz, stereo)
Frequency response ...................... 30 – 15,000 Hz (±3 dB)
Stereo separation .......................... 40 dB (at 65 dBf, 1 kHz)
AM tuner
Frequency range ........................ 531 – 1,602 kHz (9 kHz)
530 – 1,710 kHz (10 kHz)
Usable sensitivity .............................. 18 µV (S/N: 20 dB)
Selectivity .................................................. 50 dB (±9 kHz)
50 dB (±10 kHz)
Note:
Specifications and the design are subject to possi-
ble modification without notice due to improve-
ments.