Pioneer KEH-P4020 Cassette Player User Manual


 
Audio Adjustments
Adjusting equalizer curves
You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in CUSTOM.
1 Press AUDIO
to select the equalizer mode.
Press
AUDIO until EQ-L/EQ-M/EQ-H appears in
the display.
2 Select the band you want to adjust with
the 2/3.
EQ-L (low) EQ-M (mid) EQ-H (high)
3 Press 5 or to adjust the equalizer curve.
Each press of 5 or increases or decreases
the equalizer curve respectively.
+6 –6 is displayed as the equalizer curve is
increased or decreased.
• The actual range of the adjustments are differ-
ent depending on which equalizer curve is
selected.
Notes
• If you make adjustments when a curve other
than CUSTOM is selected, the newly adjusted
curve will replace the previous curve. Then a
new curve with CUSTOM appears on the dis-
play while selecting the equalizer curve.
• You can create different CUSTOM curves for
different sources.
• The CD player (one disc only) and multi-CD
player are set to the same equalizer adjust-
ment setting automatically.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press
AUDIO to select LOUD.
Press
AUDIO until LOUD appears in the display.
2 Select LOUD on or off with 5/.
3 Select the desired level with 2/3.
LOW (low) MID (mid) HI (high)
Note
• You can also switch LOUD on or off by press-
ing the LOUDNESS.
En
17