Pioneer HTZ252DVD Home Theater System User Manual


 
Additional information
09
35
En
English
Français
Deutsch
Nederlands
Italiano
Español
Screen sizes and disc formats
DVD-Video discs come in different screen
aspects, ranging from TV programs, which are
generally 4:3, to CinemaScope widescreen
movies
1
, with an aspect ratio of up to about 7:3.
Televisions also come in different aspect
ratios; ‘standard’ 4:3 and widescreen 16:9.
2
TV system setting
Not applicable to the Taiwanese model
The default setting of this system is
AUTO
, and
unless you notice that the picture is distorted
when playing some discs, you should leave it
set to
AUTO
. If you find picture distortion with
some discs, set the TV system to match your
country or region’s system. However, this may
restrict the kinds of disc you can watch. See
the table for the kinds of discs compatible with
each setting (
AUTO
,
PAL
and
NTSC
).
3
1 Switch the unit into standby, then press
SETUP
.
2 Use
/
to choose TV SYS then press
ENTER
.
The TV system changes as follows:
AUTO
NTSC
NTSC
PAL
PAL
AUTO
The system automatically switches on and
you’ll see the new TV system setting in the
display after seeing
WELCOME
.
4
Frequency step setting
If you find that you can’t tune into stations
successfully, the frequency step may not be
suitable for your country/region.
1 Switch the unit into standby, then press
SETUP
.
2 Use
/
to choose AM 9K/10K then
press
ENTER
.
3 Use
/
to select AM 9K or AM 10K then
press
ENTER
.
Note
1 Many widescreen discs override the system’s settings so that the disc is shown in letterbox format regardless of the setting.
Set to 4:3 (Letter Box), widescreen
discs are shown with black bars top
and bottom.
Set to
4:3 (Pan&Scan)
, widescreen
discs are shown with the left and right
sides cropped. Although the picture
looks larger, you don’t actually see
the whole picture.
2• Using the
16:9 (Wide)
setting with a standard 4:3 TV, or one of the
4:3
settings with a widescreen TV, will result in distortion.
• When you watch discs recorded in 4:3 format, you can use the TV controls to select how the picture is presented. Your TV
may offer various zoom and stretch options; see the instructions that came with your TV for details.
• Some movie aspect ratios are wider than 16:9, so even with a widescreen TV, these discs will still play in a ‘letterbox’ style.
3 Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch
vertical amplitude, resulting in a display without vertical shrinkage. However, in some cases, the image may appear without col-
or. If your PAL TV does not have a V-Hold control, you may not be able to watch NTSC discs because of picture roll. If the TV has
a V-Hold control, adjust it until the picture stops rolling. On some TVs, the picture may shrink vertically, leaving black bands at
the top and bottom of the screen.
Player setting
Media Type
Format
NTSC PAL AUTO
DVD/Super VCD/
Video CD/DivX
Video
NTSC
NTSC PAL
NTSC
PAL
NTSC PAL
PAL
CD/MP3/WMA/
MPEG-4 AAC/
JPEG/no disc
NTSC PAL
NTSC or
PAL
4 You have to switch the player into standby (press
STANDBY/ON
) before each change.
XV-DV151_252.book 35 ページ 2006年2月24日 金曜日 午後2時0分