Filter
Top Products
Low pass filter:
Cut off frequency ...........80 Hz
Cut off slope .....................–12 dB/oct
Gain control:
RCA ...................................... 200 mV to 6.5 V
Speaker .............................. 0.8 V to 26 V
Maximum input level / impedance:
RCA ...................................... 6.5 V / 22 kW
Speaker .............................. 26 V / 90 kW
CEA2006 Specifications
Power output ............................. 60 W RMS × 2 Channels (at
14.4 V, 4 W and ≦ 1 % THD
+N)
175 W RMS × 1 Channels
(at 14.4 V, 4 W BRIDGE and
≦ 1 % THD+N)
85 W RMS × 2 Channels (at
14.4 V, 2 W and ≦ 1 % THD
+N)
S/N ratio ....................................... 75 dBA (reference: 1 W into
4 W)
Notes
! Specifications and the design are subject to
modifications without notice due to improve-
ments.
! The average current drawn is nearly the maxi-
mum current drawn by this unit when an
audio signal is input. Use this value when
working out total current drawn by multiple
power amplifiers.
Additional information
En
13
English
Appendix