Filter
Top Products
Adjusting initial settings
1 Press OFF and hold until the unit turns
off.
2 Press the appropriate button for your
unit.
DEH-5000UB
Press SRC and hold until FM STEP appears in
the display.
DEH-4000UB
Press MULTI-CONTROL and hold until
CLOCK SET appears in the display.
3 Turn MULTI-CONTROL to select one of
the initial settings.
DEH-5000UB
FM STEP (FM tuning step)—AUTO PI (auto PI
seek)—AUX (auxiliary input)—SW CONTROL
(rear output and subwoofer controller)—
EVER SCROLL (ever scroll)—TITLE SETTING
(multi language)—POWER SAVE (power sav-
ing)—CUSTOM COLOR (illumination color ad-
justing)
DEH-4000UB
CLOCK SET (clock)—OFF CLOCK (off clock)—
FM STEP (FM tuning step)—AUTO PI (auto PI
seek)—AUX (auxiliary input)—SW CONTROL
(rear output and subwoofer controller)—
EVER SCROLL (ever scroll)—TITLE SETTING
(multi language)
# You can also perform the same operations by
pushing MULTI-CONTROL up or down.
# To cancel initial settings, press BAND/ESC.
Setting the clock
This function is available only for DEH-4000UB.
Use these instructions to set the clock.
1 Use MULTI-CONTROL to select
CLOCK SET.
2 Press MULTI-CONTROL to display the
setting mode.
# Press BACK to return to the previous display.
3 Press MULTI-CONTROL to select the seg-
ment of the clock display you wish to set.
Each time you press MULTI-CONTROL, one
segment of the clock display is selected.
Hour—Minute
As you select segments of the clock display,
the selected segment blinks.
4 Turn MULTI-CONTROL to put a clock
right.
# You can also perform the same operations by
pushing MULTI-CONTROL up or down.
Turning the off clock
display on or off
This function is available only for DEH-4000UB.
If the off clock display is turned on, the clock
appears on the display when the sources are
off.
1 Use MULTI-CONTROL to select
OFF CLOCK.
2 Press MULTI-CONTROL to turn the off
clock display on.
# To turn the off clock display off, press
MULTI-CONTROL again.
Setting the FM tuning step
The FM tuning step employed by seek tuning
can be switched between 100 kHz, the preset
step, and 50 kHz.
! If seek tuning is performed in 50 kHz steps,
stations may be tuned in imprecisely. Tune
in the stations with manual tuning or use
seek tuning again.
1 Use MULTI-CONTROL to select FM STEP.
2 Press MULTI-CONTROL to display the
setting mode.
Initial Settings
En
24
Section
04