Filter
Top Products
En
15
Other Functions
Setting the time
This is used to set the time on the unit’s clock
display.
1 Press
SOURCE and hold until the unit turns
off.
2 Press
AUDIO and hold until TIME appears
in the display.
3 Select the portion of the time display you
wish to set with 2/3.
Pressing 2/3 will select a portion of the clock
display:
HOUR—MINUTE
As you select portions of the clock display the
portion selected will blink.
4 Select the correct time with 5/∞.
Pressing 5 will increase the selected hour or
minute. Pressing ∞ will decrease the selected
hour or minute.
• To cancel time settings, press
BAND.
• You can also cancel time settings by holding
down AUDIO until the unit turns off.
Setting the time display on or off
You can turn the time display on even when the
sources and the demonstration are off.
Press CLOCK
to select the time display.
Each press of
CLOCK turns time display on or
off.
• The time display disappears temporarily when
you perform other operations, but the time indi-
cation is displayed again after 25 seconds.