Filter
Top Products
Repeating play
Repeat play plays the same track/folder within
the selected repeat play range.
1 Press FUNCTION to select RPT.
2 Press c or d to select the repeat range.
DSC – Repeat all tracks
TRK – Repeat just the current track
FLD – Repeat the current folder
# If you select another folder during repeat play,
the repeat play range changesto disc repeat.
# When playing CD, performing track search or
fast forward/reverse cancels the repeat playauto-
matically.
# When playing WMA/MP3/WAV disc, perform-
ing track search or fast forward/reverse during
TRK (track repeat) changesthe repeat play range
to folder repeat.
# When FLD (folder repeat)is selected, it is not
possible to play back asubfolder of that folder.
# Toreturn to the normal display, press BAND.
Playing tracks in random order
Random play plays tracks in a random order
within the selected repeat range.
1 Select the repeat range .
Refer to Repeating play on this page.
2 Press FUNCTION to select RDM.
3 Press a or b to turn random play on or
off.
When random play is on, RDM appears in the
display.
If you turn random play on during folder re-
peat, FRDM appears in the display.
# Toreturn to the normal display, press BAND.
Scanning tracks or folders
Scan play searches the song within the se-
lected repeat range.
1 Select the repeat range .
Refer to Repeating play on this page.
2 Press FUNCTION to select SCAN.
3 Press a to turn scan play on.
SCAN appears in the display. The first 10 sec-
onds of each track is played.
# If you turn scan play on duringFLD, FSCN ap-
pears in the display.
4 When you find the desired track press
b to turn scan play off.
# If the display has automaticallyreturned to
the playback display, selectSCAN again by press-
ing FUNCTION.
# After scanning of a disc (folder)is finished,
normal playbackof the trackswill begin again.
Pausing disc playback
Pause lets you temporarily stop playback of
the disc.
1 Press FUNCTION to select PAUSE.
2 Press a or b to turn pause on or off.
# Toreturn to the normal display, press BAND.
Using compression and BMX
Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of this unit.
1 Press FUNCTION to select COMP OFF.
2 Press a or b to select your favorite set-
ting.
COMP OFF—COMP 1—COMP 2—
COMP OFF—BMX 1—BMX 2
# Toreturn to the normal display, press BAND.
Searching every 10 tracks in the
current disc or folder
You can switch the search method between
fast forward/reverse and searching every 10
tracks. Selecting ROUGH enables you to
search every 10 tracks.
Operating this unit
En
11
English
Section
02