Filter
Top Products
DEH-1630R/XU/EW
63
5678
56
7
8
C
D
F
A
B
E
- CONNECTION DIAGRAM
8.
Cap (1*)
When not using this terminal,
do not remove the cap.
14.
ISO connector
Note:
In some vehicles, the ISO connector may be
divided into two. In this case, be sure to
connect to both connectors.
1*
2*
4*
3*
5*
10.
Yellow (2*)
To terminal always supplied
with power regardless of
ignition switch position.
12.
Red (4*)
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
9.
Yellow (3*)
Back-up
(or accessory)
11.
Red (5*)
Accessory
(or back-up)
7.
Connect leads of the same
color to each other.
19.
Blue/white
To system control terminal of
the power amp (max. 300 mA
12 V DC).
21.
Blue/white (7*)
ToAuto-antenna relay control terminal
(max. 300 mA 12 V DC).
Note:
Depending on the kind of vehicle, the function
of 3* and 5* may be different. In this case, be
sure to connect 2* to 5* and 4* to 3*.
6.
2. This Product
3.
Antenna jack
15.
Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep theAudio Mute lead free of any connections.
17.
Connecting cords with RCA pin plugs
(sold separately)
22.
Blue/white (6*)
23.
The pin position of the ISO connector will differ
depends on the type of vehicle. Connect 6* and 7*
when Pin 5 is an antenna control type. In another
type of vehicle, never connect 6* and 7*.
1. Rear output
13.
Black (ground)
To vehicle (metal) body.
27.
24. Left
25.
Right
26.
Rear Speaker
26.
Rear Speaker
18.
Power amp
(sold separately)
20.
System remote control
Perform these connections when using
the optional amplifier.
5. Jack for the Wired Remote Control.
4.
Fuse
16. Speaker leads
White: Frontleft +
White/black: Front left ≠
Gray: Front right +
Gray/black: Front right ≠
Green: Rearleft +
Green/black: Rear left ≠
Violet: Rearright +
Violet/black: Rear right ≠