Filter
Top Products
ITS memo
Refer to Using ITS playlists on
page 54.
TitleInput "A"
Refer to Entering disc titles on
page 20.
Notes
! If you select other discs during repeat play,
the repeat play range changes to Disc repeat.
! During video CD or CD playback, if you per-
form track search or fast forward/reverse dur-
ing Track repeat, the repeat play range
changes to Disc repeat.
! During compressed audio playback, if you se-
lect another folder during repeat play, the re-
peat play range changes to Disc repeat.
! During compressed audio playback, if you per-
form track search or fast forward/reverse dur-
ing Track repeat, the repeat play range
changes to Folder repeat.
! When using this unit with multi-DVD player,
you can switch to ITS play mode, ITS memo
and disc title input.
! The ITS function of a DVD player differs
slightly from ITS playback with a multi-CD
player. With multi-DVD player, ITS playback ap-
plies only to the CD playing. For details, refer
to Using ITS playlists on page 54.
TV tuner
Basic Operations
You can use this unit to control a TV tuner,
which is sold separately.
For details concerning operation, refer to the
TV tuner’s operation manual. This section pro-
vides information on TV operations with this
unit which differs from that described in the
TV tuner’s operation manual.
3
3
3
1
1
1
1
2
2
2
2
1 Band indicator
2 Preset number indicator
3 Channel indicator
1 Press SOURCE to select the TV.
2 Press BAND to select a band.
Press BAND until the desired band is dis-
played, TV-1 or TV-2.
3 To perform manual tuning, push
MULTI-CONTROL left or right.
4 To perform seek tuning, push and hold
MULTI-CONTROL left or right for about one
second and release.
The tuner will scan the channels until a broad-
cast strong enough for good reception is
found.
# You can cancel seek tuning by pushing
MULTI-CONTROL left or right.
# If you push and hold MULTI-CONTROL left or
right, you can skip broadcasting channels. Seek
tuning starts as soon as you release
MULTI-CONTROL.
Available accessories
En
58
Section
03