Pinnacle Speakers MB-10000 Speaker System User Manual


  Open as PDF
of 2
 
STEP 2: CONNECTIONS
Be sure to observe proper polarity for all speaker wire connections: Receiver PLUS (red terminal) to
Speaker PLUS, Receiver MINUS (black terminal) to Speaker MINUS. For the best results, we recommend
12, 14 or 16 gauge wire; consult your dealer for options.
1) Connect your Receiver’s Right Channel Speaker Output to the Right-most (from the front) terminal
cup on your LCR Speaker Bar.
2) Connect your Receiver’s Center Channel Speaker Output to the Center terminal cup on your
LCR Speaker Bar.
3) Connect your Receiver’s Left Channel Speaker Output to the Left-most (from the front) terminal cup
on your LCR Speaker Bar.
4) Connect your Surround Speakers to your Receiver's Surround Speaker Outputs.
5) Connect the RCA cable to your Receiver’s SUBWOOFER OUT jack and to the Line Input on the
Subwoofer.
PR INSTR QMA REV0410
 previous