Pinnacle Speakers 66 Speaker User Manual


 
2
We congratulate and thank you for choosing a PINNACLE
®
SLIMsub 66
TM
subwoofer. This
uniquely versatile subwoofer can be placed on a shelf or floor, flush wall mounted horizontally or
vertically, pivot bracket mounted in any orientation, or placed under or behind your sofa, table or chair!
Designed to work with our PIN AMP 800 amplifier, you can drive one, or multiple, SLIMsub 66 subs to
impressive depths & volume levels. For a powerful "wall of bass" we recommend using two SLIMsub 66
subs in the front, or for a unique & enveloping surround subwoofer system, four SLIM SUB 66s can also
be employed, two in the front, two in the rear.
PLACEMENT:
Recommended Subwoofer Placement:
a) Within a few inches of the room corner closest to your left or right front speaker (maximum low
bass output);
b) Against the wall between your left and right front speakers (strong low bass output with optimal
blending to front speakers);
c) Near any other room corner or wall.
Other locations will provide varying degrees of low bass impact and blending with your front speakers.
We recommend listening to your system, with the subwoofer in different room positions, to obtain a
location with an optimum response.
When placing the SLIMsub 66 on a shelf or floor, please attach the 4 rubber pads to the bottom
corners of the cabinet.
When placing the SLIMsub 66 on it's back, please attach the 4 rubber pads to the corners on the
rear of the cabinet.
For pivot wall mounting, use (2) pivot brackets with a weight capacity of at least 12 pounds each.
Simply unscrew the two decorative plugs on the rear of the cabinet to access the threaded inserts.