Filter
Top Products
AMP 200 SPECIFICATIONS
Stereo (8 ohm): 80W RMS per channel at 8 ohms,
20Hz - 20kHz, <0.2% THD+N
Stereo (4 ohm): 125W per channel at 4 ohms,
20Hz-20kHz, <0.2% THD+N
Bridged Mono (8 ohm): 250W RMS at 8 ohms,
20Hz - 20kHz, <0.2% THD+N
Frequency Response: 20Hz - 20kHz, +0dB, -0.5dB
Signal to Noise Ratio: 103dB A-weighted, referred to rated
power at 4 ohms
Channel Separation: 65dB @ 1kHz, referred to rated power
at 8 ohms
Sensitivity: Variable, 350mV to 2.8V for rated
power at 8 ohms
AC Power Consumption: 700W maximum
Net Weight: 26.4lbs / 12.0kgs
Gross Weight: 34.1lbs / 15.5kgs
AudioSource®
9300 North Decatur St.
Portland, OR 97203
503.286.9300
www.audiosource.net
AMP200 / AMP300 Owner’s Manual 8.06 8100.0303B
AMP 200 / AMP300
OWNER’S MANUAL
Power
Model AMP200
Stereo Power Amplifier
Speakers
A B
ON
OFF
ON / STANDBY
Balance Trim
Left Right
Volume Trim
Power
Model AMP200
Stereo Power Amplifier
Speakers
A B
ON
OFF
ON / STANDBY
Balance Trim
Left Right
Volume Trim
4.0”
(89mm)
16.5”
(419mm)
14.0”
(356mm)
5.8”
(133mm)
16.5”
(419mm)
14.0”
(356mm)
AMP 300 SPECIFICATIONS
Stereo (8 ohm): 150W RMS per channel at 8 ohms,
20Hz - 20kHz, <0.2% THD+N
Stereo (4 ohm): 235W per channel at 4 ohms,
20Hz-20kHz, <0.2% THD+N
Bridged Mono (8 ohm): 470W RMS at 8 ohms,
20Hz - 20kHz, <0.2% THD+N
Frequency Response: 20Hz - 20kHz, +0dB, -0.5dB
Signal to Noise Ratio: 103dB A-weighted, referred to rated
power at 4 ohms
Channel Separation: 65dB @ 1kHz, referred to rated power
at 8 ohms
Sensitivity: Variable, 350mV to 2.8V for rated
power at 8 ohms
AC Power Consumption: 1200W maximum
Net Weight: 35.2lbs / 16.0kgs
Gross Weight: 44.0lbs / 20.0kgs
9300 North Decatur St. Portland, OR 97203 • 503.286.9300 • www.audiosource.net