Filter
Top Products
28
English
5.3 Auto-standby
When the set has reached the end of playback/
recording and remains in the stop position for
more than 20 minutes, the set will switch to
standby mode automatically to save power.
5.4 Volume control
1
Check that playback has started
2 Adjust the volume with VOL +/- buttons
➜ Display shows the volume bar, indicating the
volume level
5.5 MUTE
During playback, you can temporarily switch off
the sound without switching off the set.
1 Press MUTE to switch off the sound.
➜The icon appears. Playback continues
without sound.
2 To switch on the sound, press MUTE again or
adjust the volume with VOL +.
–You can also switch on the sound by activating
MUSIC BROADCAST on the Center.
➜The icon disappears
5.6 Sound control
5.6.1 Equalizer
Equalizer enables you to select predefined sound
settings.
1 Press MENU to enter the menu screen
2 Use the navigation controls 3 or 4 and 2 to
select Equalizer.
3 Press 3 or 4 and 2 to select Rock, Pop (default),
Jazz, Neutral,Techno, Classical or Bass/Treble
4 Press OK (or 2) to confirm
To set Bass/Treble:
1 Press MENU to enter the menu screen
2 Use the navigation controls 3 or 4 and 2 to
select Settings
3 Press 3 or 4 and 2 to select Treble/Bass
4 Press 1 / 2 / 3 / 4 to select your option: Treble
(+3 to -3), Bass (+3 to -3)
5.6.2 Bass adjustment
● Press DBB (Dynamic Bass Boost) once or more
times to select your option: DBB OFF (by
default), DBB 1, DBB 2 or DBB 3.
Helpful hint:
– Some discs might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce
the volume.
PORTABLE
SEARCH
SAME ARTIST
SMART EQ
DBB
5. Basic functions
pg001-pg068_WACS7000_Eng 2007.2.3 11:05 AM Page 28