Philips SHB5800 Headphones User Manual


  Open as PDF
of 14
 
6 EN
5 Use your
headset
Connect the headset to a
Bluetooth device
1 Turn on your mobile phone/Bluetooth
device.
2 Press and hold the on/off button to turn
the headset on.
» TheblueLEDashes.
» The headset is reconnected to
the last connected mobile phone/
Bluetooth device automatically. If the
last one is not available, the headset
tries to reconnect to the second last
connected device.
Tip
• If you turn on the mobile phone/Bluetooth device or
activate the Bluetooth feature after turning on the
headset, you have to reconnect the headset and mobile
phone/Bluetooth device manually.
Note
• If the headset fails to connect to any Bluetooth device
within range in 5 minutes, it will switch off automatically
to save the battery life.
Manage your calls and music
On/off, call/music control button
Task Operation Sound
or LED
indicator
Turn the headset
on.
Press and
hold for 2
seconds.
Power on
tone
Turn the headset
off.
Press and
hold for 4
seconds.
Power off
tone
Play or pause
music.
Press once. N/A
Pick up/hang up
a call.
Press once. 1 short
beep
Reject an
incoming call.
Press and
hold
1 short
beep
Redial the last
number.
Press twice. 2 short
beeps
Switch caller
during a call.
Press twice 1 short
beep
Volume/Track control button
Adjust volume. Press once N/A
Skip forward. Press and hold N/A
Skip backward. Press and hold N/A
Other headset indicator status
Headset status Indicator
The headset is connected
to a Bluetooth device,
while the headset in
standby mode or while you
are listening to music.
The blue LED
ashesforevery
6 seconds.
The headset is ready for
pairing.
TheLEDashes
blue and white
alternately.
The headset is on but not
connected to a Bluetooth
device.
The blue LED
ashesquickly.
There is an incoming call. The blue LED
ashesonceper
second.
The battery level is low. The white LED
ashes.
The battery is fully charged. The white LED
is off.
 previous next