Filter
Top Products
7
English
EN
4 Use the headset
Connect the headset to a
mobile phone
1 Turn on your mobile phone.
2 Press and hold to turn the headset on.
» The blue LED ashes.
» The headset is reconnected to the last
connected device automatically. If the
last one is not available, the headset
tries to reconnect to the second last
connected device.
Tip
• If you turn on the mobile phone or its Bluetooth
feature after turning on the headset, connect the
headset from the Bluetooth menu on your mobile
phone.
Automatic power saving
If the headset fails to connect any Bluetooth
device within range in ve minutes, it powers
down automatically to save the battery life.
Use your headset
Task Operation Sound or LED
Indicator
Turn the
headset on.
Press and
hold for
more than 1
second
1 short beep
• 1 blue ash:
Battery level
> 50%
• 1 white ash:
Battery level
< 50%
Turn the
headset off.
Press and
hold for
more than 4
seconds
• 1 long beep
• 1 long white
ash
Play or pause
music.
Press
1 short beep
Pick up or
terminate a
call.
Press
1 short beep
Reject a call. Press and
hold
1 short beep
Redial the
last number.
Press
twice
1 short beep
Switch caller
in a call.
Press
twice
1 long beep
Adjust
volume.
Press +/- 1 short beep
Skip forward. Press and
hold +
1 short beep
Skip
backward.
Press and
hold -
1 short beep
Other status and indicators
Headset status Indicator
The headset is connected
to a Bluetooth device, while
the headset is in standby
mode or while you are
listening to music.
Blue LED
ashes every 6
seconds.
The headset is ready for
pairing.
LED ashes
whiteand
bluealternately.
The headset is on but not
connected to a Bluetooth
device.
Blue LED
ashes fast.
There is an incoming call. Blue LED
ashes twice
per second.
Low battery. White LED
ashes.
Battery is fully charged. White LED is
off.