Philips MC120 Stereo System User Manual


 
14
English
3140 115 30051
Radio Reception
BAND
RDS
CLOCK
TIMER
ON
OFF
PROGRAM
PREV NEXT
STOP
iR
PLAYPAUSE
SOURCE
SELECT
SHUFFLE
STANDBY-ON PROGRAM REPEAT
Tuning to radio stations
1 Select TUNER source.
TUNER is displayed briefly.
2 Press BAND once or more to select your
waveband.
3 Press down on TUNING à or á and release
button.
The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning: SEARCH.
If a FM station is received in stereo, STEREO is
shown.
4 Repeat step 3 if necessary until you find the
desired station.
To tune to a weak station, press TUNING à
or á briefly and repeatedly until you have
found optimal reception.
Programming radio stations
You can store up to a total of 40 radio stations
in the memory.
Automatic programming
Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden. The system will only programme
stations which are not in the memory already.
1 Press PRESET 3 or 4 (on the remote control
¡ or ) to select the preset number where
programming should start.
Note:
If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2 Press PROGRAM for more than 2 seconds to
activate programming.
AUTO is displayed and available stations are
programmed in order of waveband reception
strength: FM followed by MW and LW. The last
preset automatically stored will then be played.
Manual programming
1 Tune to your desired station (see Tuning to radio
stations).
2 Press PROGRAM to activate programming.
PROGRAM flashes in the display.
3 Press PRESET 3 or 4 (on the remote control
¡ or ) to allocate a number from 1 to 40 to
this station.
4 Press PROGRAM again to confirm the setting.
PROGRAM disappears, the preset number and
the frequency of the preset station are shown.
5 Repeat the above four steps to store other
stations.
You can override a preset station by storing
another frequency in its place.