Philips FW386C Stereo System User Manual


 
21
English
Selecting External Equipment
If you have connected the audio out terminals of the
external equipment (TV, VCR, Laser Disc or DVD player) to
the AUX IN terminals, you can hear the enhanced sound
from the system.
Press AUX to select the external mode.
"AUX" will be displayed.
Note:
All the sound control features (e.g. DSC, DBB, etc.) are
available for selection.
TAPE AUX
Continuous Playback From Tape Deck 2 to
Tape Deck 1
1 Press TAPE to select TAPE mode.
2 Load the tapes in tape deck 1 and 2.
3 Press PLAY 2␣ on tape deck 2.
4 Press PAUSE on tape deck 1.
5 Press PLAY 2 on tape deck 1.
Playback will begin with tape deck 2 and will
continue with tape deck 1 when playback on tape
deck 2 ends.
6 Press STOP•OPEN if you want to stop playback before
the end of the tape in tape deck 1 or tape deck 2.
Notes:
During rewinding or fast forwarding of a tape, it is also
possible to select another source mode (e.g. CD, TUNER
or AUX mode).
Check and tighten slack tape before use with a pencil.
Slack tape may get jammed or may burst in the
mechanism.
C-120 tape is extremely thin and is easily deformed or
damaged. It is not recommended for use in this system.
Store the tapes at room temperature and do not put
them too close to a magnetic field (for example, a
transformer, TV or loudspeaker boxes).
STEREO
AM
PM
FM
LW
MW
TIMER
SHUFFLE
REPEAT
PROGRAM
REPLAY
REC
HSD
MAX
NEWS
TUNER TAPE AUX
BAND
TAPE 1 • 2
VIDEO
TIMER
CLOCK
PROGRA
RDS NEWS
I S
DBB
MASTER VOLU