Filter
Top Products
English
19
3139 115 14781
Getting Started
Step 1: Inserting batteries into
the remote control
1
3
2
1 Open the battery compartment.
2 Insert two batteries type R06 or AA,
following the indications (+-) inside
the compartment.
3 Close the cover.
CAUTION!
– Remove batteries if they are
exhausted or if the remote control
is not to be used for a long time.
– Do not use old and new, or
different types of batteries in
combination.
– Batteries contain hazardous
chemical substances, so they should
be disposed of properly.
Using the remote control to
operate the system
1 Aim the remote control directly at the
remote sensor (iR) on the front panel.
2 Select the source you wish to control by
pressing one of the source select buttons
on the remote control (for example TV,
TUNER.)
3 Then select the desired function (for
example É,
S,
T.)
Step 2: Setting the TV
IMPORTANT!
Make sure you have completed all
the necessary connections. (See
page 11-12 “Connecting to TV”)
1 Press SOURCE control until “DVD/CD”
appears on the display panel.
2 Turn on the TV and set it to the correct
video-in channel. You should see the blue
DVD background screen on the TV.
➜Or, the TV remote control may have a
button or switch that chooses between
different video modes.
➜Or, set the TV to channel 3 or 4 if you
are using an RF modulator.
001-053-hts5500-37-Eng47 13/04/05, 4:13 PM19