Philips HTS3440 Stereo System User Manual


 
36
English
Audio Setup Page (underlined options are the factory default settings)
Speakers Volume Access the speaker’s level setup menu. Use W X keys to adjust
the volume level for each connected speaker between -6dB to
+6dB.
Speakers Delay Access the speaker’s distance setup menu. Use W X keys to set
the delay times for the center and rear speakers based on the
listening position and distance.
Note: 1 ms increase/decrease of delay time is equivalent to one (1) foot
change in distance. Use the longer delay time settings when the rear
speakers are closer to the listener than the front speakers.
Night Mode This mode optimizes playback of sound at low volume. High
volume outputs will be softened and low volume outputs will be
enhanced to an audible level. This feature is only applicable for
DVD video discs with Dolby Digital mode.
{ On } – Turns on night mode.
{ Off } – Turns off night mode feature. Selects this to
enjoy the surround sound with its full
dynamic range.
CD Upsampling This feature enables you to convert your music CD to a higher
sampling rate using sophisticated digital signal processing for
better sound quality. If you have activated the CD upsampling
feature, the system will automatically switch to stereo mode.
{ Off } – Turns off CD-upsampling.
{ 88.2 kHz (X2) } – Select this to convert the sampling rate of
the CDs twice as high as the original rate.
Note: If you press the SURR button on the remote control to select
multi-channel mode, it will turn off the CD upsampling feature.
Lip Sync This feature is not applicable for this model.
DVD Setup Menu Options (continued)