Philips FWC577 Stereo System User Manual


 
17
English
USB PC Link
Enable digital CD audio output
Before playing the CD through your PCs
CD-ROM drive, it is necessary to configure your
PCs hardware as follows:
For Windows ME/2000/XP
1 Enter the system control panel menu and
select :
SYSTEM HARDWARE
DEVICE MANAGER CD-ROM DRIVES
ACTIONPROPERTIES PROPERTIES.
OR
For Windows 98 (SE)
Enter the system control panel menu and
select MULTIMEDIA and CD MUSIC.
2 Check the Enable digital CD audio for this
CD-ROM device setting option is selected
(enabled).
Note:
You may need to refer to your PCs manual for
correct configuration.
Connecting to USB PC LINK
USB PC LINK allows you to playback your music
collection from the PC via the powerful amplifier
and speakers of this system.
IMPORTANT!
Make sure the MusicMatch software has
been installed. Refer to Quick Setup
Guide for USB PC Link.
REPEAT SHUFFLE
DIM SLEEP CLK/TIMERTIMER
VOL
ALBUM
TITLE
USB PC LINK
ON/OFF
2
3
4
5
1
1 Turn on your computer and launch the
MUSICMATCH JUKEBOX.
The volume level of PC should not be put
into mute.
2 Press USB PC LINK.
If the audio streaming is detected,
CONNECTING is displayed and the USB
indicator will be flashing.
If NO CONNECTION is displayed, check the
connection between your PC and mini system.
3 Press í or ë until the desired track in the
playlist is highlighted.
4 Press ÉÅ to start playback.
The track information will appear on the
display. The display only supports English
characters.
During playback,
Press SHUFFLE to play all available tracks in
the playlist in random order.
Press REPEAT to repeat playback of all the
tracks in the playlist.
5 To exit, select another active mode or
press Ç.