Filter
Top Products
OUTPUT
R
L
6
Hooking Up Your Compact Disc Changer
The Compact Disc Changer connection – an audio system to Compact Disc Changer – is shown below.
Back of Compact Disc Changer
L(eft) OUTPUT Jack
Select a location for your
Compact Disc Changer that is
near your receiver/amplifier
and a standard AC outlet.
Plug one end of the supplied
audio cable into the Compact
Disc Changer’s R(ight) and
L(eft) OUTPUT jacks, match-
ing the red plug to the red
R(ight) jack and the white plug
to the white L(eft) jack.
Plug the other end of the cable
into the receiver/amplifier’s
corresponding left and right
CD, AUX, or TAPE INPUT
jacks.
Plug the Compact Disc
Changer’s power cord into a
standard AC outlet.
OUTPUT
R
L
CD
R
L
RR
L
RR
L
11
22
33
44
• Do not place the Compact Disc Changer on top of the receiver/amplifier or on any component that emits heat.
• If you place the Compact Disc Changer near other audio components or their wires, you might hear a hum when you play a
disc. Move the components or their wires to eliminate the noise.
• Do not use the receiver/amplifier’s PHONO inputs. This could damage the receiver/amplifier.
• To prevent electric shock, do not use this polarized plug with an extension cord, receptacle, or other outlet unless the blades
can be fully inserted to prevent blade exposure.
NOTES
R(ight) OUTPUT Jack
Back of the Receiver/Amplifier
L(eft) Input Jack
R(ight) Input Jack
Back of Compact Disc Changer
Wall
Outlet
CDC735comb 4/9/99 5:39 PM Page 6