Philips OTT2000 Stereo System User Manual


  Open as PDF
of 24
 
12 EN
Play from USB
Note
•
Make sure that the USB storage device contains
playable audio content.
• OnlyMP3leswithbitratesfrom32kbpsto320kbps
are supported.
• The USB socket does not support connections
with USB extension cables and is not designed for
communicate directly with a computer.
1 Push down the USB protective cover and
then insert a USB storage device into the
socket.
2 Press SOURCE repeatedly to select USB
source.
» Play starts automatically. If not, press
.
• To select a folder, press
/ .
• Toselectanaudiole,press
/ .
Play from a Bluetooth device
You can listen to a Bluetooth device through
the micro system.
Note
•
Before you connect a Bluetooth device to the unit,
familiarize yourself with the Bluetooth capabilities of
the device.
• Keep the unit away from other electronic devices that
may cause interference.
• The effective operation range between the unit and the
paireddeviceisapproximately10meters(30feet).
• Any obstacle between the unit and the device can
reduce the operational range.
1 Press SOURCE repeatedly to select BT
source.
» TheBluetoothindicatorashesblue.
2 Activate the Bluetooth function on your
Bluetooth device (see the device user
manual).
3 Select "PHILIPS OTT2000" on your device
for pairing.
4 After successful connection, the Bluetooth
indicator turns to solid blue.
5 Start music play on your Bluetooth device.
Tip
•
If the micro system switches from a Bluetooth source
to another source, the connected Bluetooth device
disconnects automatically.
• The system can memorize up to 4 previously
connected Bluetooth devices.
USB record
Audio CD tracks, MP3 discs,audio from vinyl
record and Bluetooth, radio, and audio from
external devices can be recorded as .mp3
formatlestoaUSBstoragedevice.
ThersttimeyourecordtotheUSBstorage
device, a folder named 'PHILIPS OTT2000' is
automatically created in the USB storage device.
Eachtimeyourecord,therecordedlesare
stored to this folder.
 previous next