Filter
Top Products
15EN
Note
• Random play cannot be selected when you play the
programmed tracks.
Program tracks
You can program a maximum of 40 tracks.
1 In Disc or USB A mode, press to stop
playing.
2 Press PROG to activate the program mode.
» Anumberashesonthescreen.
3 For MP3 tracks, press ALB/PRESET+/- to
select an album.
4 Press or to select a track number,
then press PROGtoconrmselection.
5 Repeat steps 3 to 4 to program other
tracks.
6 Press to play the programmed track.
• To erase the program, press twice.
Note
• The function is not available in USB B mode.
Play audio through Bluetooth
The unit uses Bluetooth wireless technology to
stream music from your Bluetooth device to
the system.
Note
• Make sure that your Bluetooth device is compatible
with this product.
• Before pairing a device with this unit, read its user
manual for Bluetooth compatibility.
• The effective operation range between the unit and a
Bluetooth device is approximately 10 meters (30 feet).
• The unit can memorize a maximum of 8 paired devices.
• Any obstacle between the unit and a Bluetooth device
can reduce the operational range.
• Keep away from any other electronic device that may
cause interference.
1 Slide CROSS FADER to the far left.
2 Press Bluetooth to turn on the Bluetooth
function of the unit.
» The Bluetooth indicator blinks.
3 On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
(refer to the user manual of the device).
4 When [PHILIPS NTRX500] (Philips
NTRX500) is displayed on your device,
select it to start pairing and connection. If
necessary, enter default password “0000”.
» After successful pairing and connection,
the LED indicator turns solid blue.
5 Play audio on your device.
» Audio streams from your device to
the unit.
• To start, pause, or resume play, press
.
• To select another track, press or .
To disconnect the Bluetooth-enabled device:
• Disable Bluetooth on your device; or
• Move the device beyond the
communication range.
To connect another Bluetooth-enabled device:
• Disable Bluetooth on the current device,
and then connect another device.
Play from external audio
devices
You can listen to an external audio device
through the speakers of this unit.
Play from an MP3 player
1 Press AUDIO A to select the MP3 link
source.
2 Slide CROSS FADER to the far left.
3 Connect an audio input cable (not
supplied) with a 3.5 mm connector on
both ends to: