Philips NP2900 Stereo System User Manual


  Open as PDF
of 69
 
31
Location and time zone
This is how you can change the location and
time zone settings of NP2900:
1 Press SETTINGS, to go to the Settings
menu.
2 Select [Location and time zone].
3 Select a menu option and conrm.
NP2900 applies the new location and »
time zone settings.
Press » BACK
to go back to the
previous screen.
Press » HOME to go to the Home
menu.
Language
This is how you can change the language of the
display:
1 Press SETTINGS, to go to the Settings
menu.
2 Select [Language].
3 Select a menu option and conrm.
The display language changes to the »
new setting.
Press » BACK
to go back to the
previous screen.
Press » HOME to go to the Home
menu.
Register NP2900
Registration of NP2900 requires a valid email
address and mailbox access.
This is how to navigate and select with the
remote control:
Press •
or to select a menu option.
Press • OK to conrm a selection.
Press • BACK
to go back to the
previous screen.
Press • HOME to go to the Home menu.
To delete the last character entry from •
the display, press CLEAR.
To delete the whole last line entry •
from the display, press and hold
CLEAR.
The onscreen display guides you
through the process of connecting
NP2900 to your home network and
the Internet. This section describes
the typical wired setup with static
IP address. You can also follow the
onscreen prompts for advanced
congurations that are not described
in this manual.
1 Connect an Ethernet cable (sold
separately) to the ETHERNET jack of
NP2900 and the Ethernet jack of the
wired router.
2 Ensure that the wired router is turned on
and has broadband Internet access.
3 Turn on NP2900.
4 Press SETTINGS, to go to the Settings
menu.
5 Select [Wired (Ethernet)] to start the
network setup process.
NP2900 tries to acquire an automatic »
IP address.
Press » BACK
to enter your IP
address manually.
6 Enter your static IP address and conrm.
NP2900 shows the conrmation for »
the connection to the network.
NP2900 shows the prompt for the »
connection to the Internet.
7 Select [Yes] to connect to the Internet.
NP2900 shows the conrmation for »
the connection to the Internet.
English
EN
 previous next