Filter
Top Products
9
English
Rear Panel
1
0
2
3
4
5
9 8
6
7
IMPORTANT!
– Before connecting the AC power cord to the wall
outlet, ensure that all other connections have been
made.
– Never make or change any connections with the
power switched on.
– The type plate is located at the rear of the system.
1 ANTENNA
FM Antenna
For FM reception, connect the FM antenna to the FM
terminal. Move the antenna in various directions until
the clearest signal is received.
AM Loop Antenna
For AM reception, connect the AM loop antenna to
the AM terminal. Position the loop antenna to receive
the clearest sound.
1
2
● Fully insert the stripped portion of the antenna into the
terminals as shown.
Note:
– Position the antenna as far as possible from a TV, VCR or
other radiation source.
2 AUDIO IN
For connecting analogue (Left/Right) audio signals
from external sources to the unit.
VCR – connect to Video Cassette Recorder AUDIO OUT
terminal
TV – connect to Television AUDIO OUT terminal
CDR – connect to CD Recorder AUDIO OUT
terminal
3 VIDEO IN
For connecting to the corresponding VIDEO OUT
terminal on a VCR, TV or CDR.
4 DIGITAL OUT (in DVD/CD mode only)
Digital Coaxial Output RCA terminal
For connecting to external equipment that has a
digital COAXIAL IN terminal.
Digital Optical Output terminal
For connecting to external equipment that has a
digital OPTICAL IN terminal.
5 SCART OUT
For connecting to the SCART IN terminal on the TV
using the supplied scart cable.
Audio Out on/off switch
For switching on or off the audio signal from the AV
CONNECTOR to your TV.
6 VIDEO OUT
For connecting to external equipment with VIDEO IN
terminals for viewing or recording.
REC – connect to VCR or other recording device
MON– connect to TV or Monitor
Connections
CONNECTIONS