Philips MK6000 Headphones User Manual


 
Parrot MK6000
6
Car stereo with an «ISO» connector (refer to the following diagram):
Connect the male connectors of the hands-free kit to the car stereo.
Join the vehicle’s audio and power supply cables to the female connectors of the
Parrot MK6000
On the installation cable, connect the free yellow wire to one of the audio system’s
corresponding mute-in jacks if available (mute in 1, mute in 2 or mute in 3).
Note: the mute function is used to silence the sound from your car stereo to make way
for a call. The choice of the mute-in jack depends on your car stereo’s configuration.
Using ISO connectors
A: Ignition 12V
B: Constant 12V supply
C: Ground
D: Connection to the vehicle’s power supply
E: Connection to the vehicle’s speakers
1.Rear right speaker (purple / purple-black)
2.Front right speaker (grey / grey-black)
3.Front left speaker (white / white-black)
4.Rear left speaker (green / green-black)
F: This wiring is not used.