Philips MCM149 Speaker System User Manual


 
English
17
Ta pe Operation / Recording Other Connection
Recording from the radio
1 Tune to the desired radio station (see Tuning to
radio stations).
2 Press STOP•OPENÇ0 to open the tape
door.
3 Insert a suitable tape into the deck and close the
tape door.
4 Press RECORD to start recording.
5 To interrupt playback press PAUSE;. To resume,
press this key again.
6 To stop recording, press STOP•OPENÇ0.
Listening to an external source
You can listen to the sound of the connected
external device through your system’s speakers.
1 Press SOURCE on the set repeatedly or press
AUX on the remote control to select AUX
source.
2 Use a cinch cable (not supplied) to connect
MCM 149’s AUX jack (3.5 mm, located on the
back panel) to an AUDIO OUT or headphone
jack on an external equipment (such as CD
player, or VCR).
The making of unauthorized copies of
copy-protected material, including
computer programmes, files, broadcasts and
sound recordings, may be an infringement
of copyrights and constitute a criminal
offence. This equipment should not be used
for such purposes.
pg001-pg022_MCM149 2007.8.28, 11:20 AM17