Philips MCM2150 Stereo System User Manual


 
9EN
4 Play
Play from disc
1
Press CD repeatedly to select CD source.
2 Press to open the disc compartment.
3 Insert a disc with the printed side facing
upward.
4 Press to close the disc compartment.
» Play starts automatically. If not, press
.
Play from USB
Note
Make sure that the USB device contains playable audio
content.
1 Press USB repeatedly to select the USB
source.
2 Insert a USB device into the socket.
» Play starts automatically. If not, press
.
Control play
/ Select a folder.
/ Selectanaudiole.
Pause or resume play.
Stop play.
REPEAT
(repeat)
Play a track or all tracks
repeatedly.
SHUFFLE
(shufe)
Play tracks randomly.
VOL +/- Increase or decrease the
volume.
MUTE
(mute)
Mute or restore sound.
SOUND
(sound)
Enrich sound effect with DSC:
balanced, clear, powerful, warm,
and bright.
DISPLAY
(display)
Adjust display brightness.
Skip to a track
For CD:
Press
/ to select another track.
For MP3 disc and USB:
1 Press / to select an album or a folder.
2 Press / toselectatrackorale.
Program tracks
You can program a maximum of 20 tracks.
1 Press PROG to activate the program
mode.
2 For MP3 tracks, press / to select an
album.
3 Press / to select a track, and then
press PROGtoconrm.
4 Repeat steps 2 to 3 to program more
tracks.
5 Press to play the programmed tracks.
» During play, [PROG] (program) is
displayed.
• To erase the program, in the stop
position, press
.