Filter
Top Products
17
English
Clock/Timer
Activating and deactivating
TIMER
● In standby or during playback, press
TIMER once.
➜ Display shows if activated, and disappears if
deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time. The clock time
needs to be set first before the sleep timer can
be used.
● Press SLEEP on the remote
control once or more.
➜ Display shows SLEEP and
one of the sleep time options in
sequence: 60, 45, 30,15, 0, 60...
if you have selected a time.
● To deactivate, press STANDBY ON on the
system or remote control.
➜ SLEEP disappears from the display.
Setting the clock
1 In standby, press CLOCK SET.
➜ The clock digits for the hours flash.
2 Press TUNING 4 ¢ to set the hours.
3 Press CLOCK SET again.
➜ The clock digits for the minutes flash.
4 Press TUNING 4 ¢ to set the minutes.
5 Press CLOCK SET to confirm the time.
Note:
–The backlight for clock display is off in standby.
Setting the timer
● The system can be used as an alarm clock,
whereby the CD or TUNER is switched on at a
set time. The clock time needs to be set first
before the timer can be used.
1 In standby or active mode, press TIMER for
more than 2 seconds.
2 Press TUNING 4 ¢ to select sound
source.
3 Press TIMER to confirm your desired mode.
➜ The clock digits for the hours flash.
4 Press TUNING 4 ¢ to set the hours.
5 Press TIMER again.
➜ The clock digits for the minutes flash.
6 Press TUNING 4 ¢ to set the minutes.
7 Press TIMER to confirm the time.
➜ The timer is now set and activated.
DISPLAY/BAND
SLEEP
TIME
PG 001-019_MCM190_22-Eng 2/19/05, 15:2217