Philips MCM166 Stereo System User Manual


 
Note
Before pressing any function button on the remote control, rst select
the correct source with the remote control instead of the main unit.
If you are not going to use the remote control for a long time, remove
the batteries.
Auto install radio stations
When you connect the Micro Hi-Fi to the power supply for the rst
time, or no radio station is stored in this Micro Hi-Fi, Plug and Play is
activated to store all available radio stations automatically.
1 Connect the Micro Hi-Fi to the power supply.
[AUTO INSTALL - PRESS PLAY] (auto install - press the »
PLAY button) is displayed.
2 Press on the main unit to start installation.
[AUTO] (auto) is displayed. »
The Micro Hi-Fi automatically store radio stations with »
suf cient signal strength.
When all the available radio stations are stored, the rst »
preset radio station is broadcast automatically.
Set clock
1 Press and hold CLOCK/DISPLAY to activate the clock setting
mode.
The 12 hour or 24 hour format is displayed. »
2 Press PROG repeatedly to select 12 hour or 24 hour format.
3 Press CLOCK/DISPLAY to con rm.
The hour digits are displayed and begin to blink. »
4 Press / to set the hour.