Filter
Top Products
12
English
Basic Functions
IMPORTANT:
Before you operate the system, complete the
preparation procedures.
Plug and Play
(for tuner installlation)
Plug and Play allows you to store all available
radio stations automatically.
First time setup/power up
1
When you turn on the main supply, "
AUTO
INSTALL
-
PLEASE PRESS PLAY
/
STOP
CANCEL
" is displayed.
2
Press
2;
on the system to start installation.
➜
"
PLUG AND PLAY
" .... "
INSTALL
" is
displayed, followed by "TUNER" and "AUTO".
➜
p r o g starts ashing.
➜
The system will automatically store the radio
stations with sufcient signal strength, starting
from FM, and followed by MW band.
➜
When all the available radio stations are
stored or the memory for 40 presets are
used, the rst preset radio station will be
played.
To reinstall Plug and Play
1
In standby mode, press and hold
2;
on the
system until "
AUTO INSTALL
-
PLEASE
PRESS PLAY
/
STOP CANCEL
" is displayed.
2
Press
2;
again to start installation.
➜
All previously stored radio stations will be
replaced.
To exit without storing the Plug and Play
●
Press
9
on the system.
➜
If you do not complete the Plug and Play
installation, the function will be restarted
when you next turn on the main supply again.
Note:
– During Plug and Play, if no button is pressed
within 15 seconds, the system will exit Plug and
Play mode.
Switching the system on
●
Press STANDBY-ON
2
or SOURCE (PWR,
DISC, TUN, or AUX on the remote control).
➜
The system will switch to the last selected
source.
To switch the system to standby mode
●
Press STANDBY-ON
2
on the system (or
PWR on the
remote control).
Power-saving automatic standby
The power-saving feature automatically switches
to standby 15 minutes after a disc playback has
ended and no control is operated.
Adjusting volume and sound
1
Press VOL
+
/
-
to adjust volume.
➜
Display shows the volume level
VOL
and a
number from 0-32.
2
Press DSC repeatedly to select the desired
sound effect: JAZZ / POP / CLASSIC / ROCK.
3
Press DBB to switch bass enhancement on or
off.
➜
Display shows: if the DBB is activated.
4
Press MUTE on the remote
control to interrupt sound
reproduction instantly.
➜
Playback will continue
without sound.
●
To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.
MICRO SYSTEM MCM148
SOURCE
DBB
STANDBY
-
ON
VOL
VOL
TUNING
PROG
PRESET
iR
ALBUM/
MODE
MP3-CD/CD
-
R/CD
-
RW COMPATIBLE
MCM148_96_UM.indb 12 9/11/2009 10:47:41 AM